Panasonic AK-HRP200G Operating Instructions Manual

Also see for AK-HRP200G: Operating instructions Operating instructions Operating instructions Operating instructions Operating instructions

Panasonic AK-HRP200G Operating Instructions Manual Manual pdf 22 page image

22ROP.menu.setting. (continued)SYSTEM.(2/2)→ ＊＊ＳＹＳＴＥＭ（２／２）＊＊ＨＤＨＰＨＡＳＥＳＤＨＰＨＡＳＥＳＤ－ＨＤＶＭＩＣ１ＭＩＣ２ＧＡＩＮＡＭＰ６０dB６０dB０dB０dB０Ｈ００( indicates factory default settings.)Item Display FunctionHD.H.PHASE -1099׀0׀1099.(59.94.Hz)-1319׀0׀1319.(50Hz)Adjusts the horizontal phase ofHD SD video for the genlockreference phase.SD.H.PHASE -857׀0׀857.(59.94Hz)-863׀0׀863.(50Hz)Adjusts SD horizontal syncphase.SD-HD.V 0HADVANCE0H_SD_DLAY.Set the vertical phase of theHDTV output in relation to theSDTV output.0H:Sets the vertical phase to thesame phase.ADVANCE:When the field frequency is59.94 Hz, the phase advanceis 90H.When the field frequency is 50Hz, the phase advance is 75H.0H_SD_DLAY:The SDTV signals are delayedand set in-phase with theHDTV signals.• When the setting of this itemis set to “0H” or “ADVANCE”while the field frequency is50 Hz, images in SD formatare delayed by 1 frame + 75lines only when letterbox isselected for DOWNCONVERTMODE.For the relationship with thesync phase, refer to OperatingInstructions Settings> of AK-HCU200.ADVANCE:. 59.94Hz→90H. 50Hz→75HMIC1.GAIN 20dB40dB60dBPerforms coarse adjustment ofMIC1 gain.Item Display FunctionMIC1.AMP -20dB׀0׀20dBMakes fine adjustments of theMIC1 gain.(in.1.dB.increments)MIC2.GAIN 20dB40dB60dBMakes coarse adjustments ofMIC2 gain.MIC2.AMP -20dB׀0׀20dBMakes fine adjustments of MIC2gain.(in.1.dB.increments)FUNCTION→ ＊＊ＦＵＮＣＴＩＯＮ＊＊ＡＬＣＬＥＢＥＬＡＬＣＳＰＥＥＤＡＬＣＷＩＮＤＯＷＡＬＣＰＥＡＫＡＬＣＲＡＮＧＥＡＳＵＳＥＴＵＰＡＳＵＲＥＦＦＩＬＥＡＳＵＭＡＳＴＥＲＰＥＤＳＥＴＡＳＵＦＩＬＴＥＲＴＡＬＬＹＧＵＡＲＤ５０１５１６０ＮＯＲＭＡＬＯＵＴＦＵＬＬＦＡＣＴＯＲＹ２．０％ＲＥＦＯＦＦ( indicates factory default settings.)Item Display FunctionALC.LEVEL 0׀50׀100Adjusts the auto iris level of thelens iris.ALC.SPEED 1׀15׀25Sets the feedback speed of theauto iris.Feedback speed drops as thenumbers increase.ALC.WINDOW 1׀4Sets the image detection areawindow for the auto iris.ALC.PEAK 0׀60׀100Sets the ratio between theaverage and peak values of autoiris image detection.ALC.RANGE NORMAL3/42/41/4Sets the correction range foradjustments of the iris levelusing the IRIS knob to move theiris lever  )> in autoiris mode.ASU.SETUP OUT.FULLOUT.EASYSelects the auto setup modesetting.ASU.REF.FILE FACTORYUSER1USER2USER3Selects the file to be referencedwhen auto setup has beenstarted.ASU.MASTER.PED.SET0.0%׀2.0%׀7.5%Sets the position where themaster pedestal is to beconverged when auto setup isstarted.