Panasonic AK-HRP1005G Operating Instructions Manual

Also see for AK-HRP1005G: Operation guide Operating guide Operating guide Operating instructions Operating guide

Contents

Panasonic AK-HRP1005G Operating Instructions Manual Manual pdf 29 page image

Front panel 51 2 3 46951316710814151712111 [ALM] indicator This is the camera and CCU warning indicator lamp.Consult your dealer if a failure occurs.The indicator's color changes to indicate when the camera and CCU optical reception level isnot strong enough, when a data error has occurred in the CCU optical transmission/receptionsection, and when a fan error or temperature error has been occurred on the camera or CCU.2 [OPT] indicator This is the camera cable warning indicator lamp.Status displaysLit orange: Warns that an optical transmission error has occurred.Lit red: Indicates that the camera is not connected to the CCU.Off: The camera cable is connected normally.3 [EXT] indicator This indicator lights to warn that the lens extender is set to something other than 1x.Status displaysOn: The lens extender is set to something other than 1x.Off: This indicates that the lens extender is not being used or that it is not available.4 [D.EXT] indicator This indicator lights to warn that the digital extender is set to something other than 1x.Status displaysOn: The digital extender is set to something other than 1x.Off: This indicates that the digital extender is not being used or that it is not available.5 Adjustment value display Displays the ND filter, CC filter, iris, master gain, master pedestal, shutter, or sync shutteradjustment value based on the item selected with the [DISP] button.6 [ND] indicator Lights when the ND filter is selected with the [DISP] button.Status displaysLit green: Standard position set in the ROP menu.Lit orange: Updated from the standard position set in the ROP menu.n The standard position of the ND filter can be set in [ROP SETTING] > [STD POSITIONND] in the ROP menu.“STD POSITION ND” (see page 113)7 [CC] indicator Lights when the CC filter is selected with the [DISP] button.Status displaysLit green: Standard position set in the ROP menu.Lit orange: Updated from the standard position set in the ROP menu.n The standard position of the CC filter can be set in [ROP SETTING] > [STD POSITIONCC] in the ROP menu.“STD POSITION CC” (see page 113)- 29 -Parts and their functions