Panasonic AK-HRP1005G Operating Instructions Manual

Also see for AK-HRP1005G: Operation guide Operating guide Operating guide Operating instructions Operating guide

Contents

Panasonic AK-HRP1005G Operating Instructions Manual Manual pdf 119 page image

42 SD CARD LOADヨユヵチョリロユドㄑㄖㄔㄉナユヹユヤヶヵユヱヶヵョリロユヒチバチヒヴュチヤモンュチロヰモュモロロョリロユヴユロユヤヵノワヰムItem Setting value Setting detailsFILE SELECT ALLALL SCENESCENEALL USERUSERALL LENSLENSALL REFREFSelects the type of files to be loaded.ALLLoads the data saved with “ALL”.ALL SCENELoads all scene file data (SCENE1 to SCENE8) saved with “ALL”.SCENELoads a single scene file.ALL USERLoads all user file data (USER1 to USER3) saved with “ALL”.USERLoads data from a single user file.ALL LENSLoads all lens file data (LENS1 to LENS32) saved with “ALL”.LENSLoads a single lens file.ALL REFLoads all reference user file data (REF1 to REF3) saved with “ALL”.REFLoads data from a single reference user file.GET FILE - When you press the menu operation dial, data of the type selected in [FILE SELECT] isloaded from the memory card, and a list of file names appears.When you select a file from the file list and press the menu operation dial, the previousscreen appears again, and the file name of the selected data appears in [GET FILE].PUT FILE CURRSCENE1 to SCENE8EXT1EXT2USER1 to USER3LENS1 to LENS32REF1 to REF3Specify the LOAD destination type.“CURR” represents CURRENT.This cannot be specified when [FILE SELECT] is set to “ALL”, “ALL SCENE”, “ALLUSER”, “ALL REF” or “ALL LENS”.When [FILE SELECT] is set to “SCENE”, “SCENE1” to “SCENE8” and “EXT1” and“EXT2” can be selected. The loaded data is saved to the unit, only when “EXT1” or“EXT2” is selected, and pressing the [EXT1] or [EXT2] button of the SCENE FILEapplies the data to the camera and CCU.“Front panel 4” (see page 28)When [FILE SELECT] is set to “USER”, “USER1” to “USER3” can be selected.When [FILE SELECT] is set to “LENS”, “LENS1” to “LENS32” can be selected.When [FILE SELECT] is set to “REF”, “REF1” to “REF3” can be selected.EXECUTE NO?YES?Select “YES?” to load the selected data.NOTEAs the unit is not equipped with a clock function, the date and time at which the file was saved on the camera will be used for thecreation dates of saved files.After starting this process, do not turn off the unit or remove SD cards until the process is complete.- 119 -ROP menu