Restrictions on useIt is recommended that the remote operation panel and all devices to be used with the remote operation panel be connected to the samenetwork segment.Events related to settings of network devices may occur if devices are connected to different segments, so verify operation carefully beforeplacing devices into service.Memory cardsMemory cards used with the unit should conform to SD or SDHC standards.Be sure to use the unit to format memory cards.Memory cards with the following capacity can be used with the unit.SD: 8 MB to 2 GBSDHC: 4 GB to 32 GBSDXC memory cards are not supported.For the latest information not described in the Operating Instructions, refer to the following website.https://pro-av.panasonic.net/Observe the following points when using and storing this unit.Avoid high temperature and humidity.Avoid water droplets.Avoid static electricity.Upgrade softwareYou can obtain the upgrade software from Service and Support on the following website.https://pro-av.panasonic.net/For the upgrade procedure, refer to the instructions included with the download file.Software for peripheral equipmentSoftware updates will also become necessary for the peripheral equipment that is connected to this unit (cameras or CCUs).For details, consult your dealer.File types handled by the unitScene file Data for creating the required image characteristics.Reference file The term reference file is a generic term for user files and factory files.User file A user file is system setting data composed of scene files and operation data. The user can record user files.Factory file A file that contains camera settings that were stored at the factory.Lens file Data for correcting specific lens characteristics.ROP configuration file ROP specific setting data.- 10 -Introduction