– 50 –Chapter 3 Preparation — Setting of time dataf Set two digits each.Press the button to reset to [00].4 Confirm the setting value of the user bits.f The setting value is confirmed when last two digits are set.Memory function of the user bitsSetting contents of the user bits is automatically recorded, and it is maintained even if the power is set to < h > (standby).Frame rate informationThe relationship between frame rate, image pull-down, time code, and user bits is as follows.Verification information on the right-hand six digitsFixed valuesREC markCamera video modeFrame rater Camera video modeThe display of the camera video mode differs depending on the setting of following menus.f The [SYSTEM] menu → [REC FORMAT]f The [SCENE FILE] menu → [VFR] or the [SYSTEM] menu → [SUPER SLOW][FREQUENCY] Recording frame frequency of [RECFORMAT]Display of camera video modeWhen [VFR] or [SUPER SLOW] is[ON]When [VFR] and [SUPER SLOW]are [OFF][59.94Hz] 23.98p D C29.97p 9 859.94p 9 859.94i — 0[50.00Hz] 25.00p B A50.00p B A50.00i — 2Setting the time code1 Select the [SYSTEM] menu → [FREQUENCY] → [59.94Hz]/[50.00Hz].2 From the [SYSTEM] menu → [FILE FORMAT]/[REC FORMAT], select the recording format.3 Select the [RECORDING] menu → [TC/UB] → [DF/NDF] → [DF]/[NDF].[DF]: Advances the time code in the drop frame mode.[NDF]: Advances the time code in the non-drop frame mode.4 Select the [RECORDING] menu → [TC/UB] → [TC PRESET].The [TC PRESET] screen is displayed.5 Set the time code.f Press the button to reset the time code to 0.6 Confirm the setting value of the time code.f The setting value is confirmed when last two digits are set.r Setting range of time codeThe range of the time code that can be set differs depending on the recording frame frequency of [REC FORMAT].[FREQUENCY] Recording frame frequency of [RECFORMAT]Range of the time code that can be set[59.94Hz] 59.94p, 29.97p, 59.94i 00:00:00:00 - 23:59:59:2923.98p 00:00:00:00 - 23:59:59:23[50.00Hz] 50.00p, 25.00p, 50.00i 00:00:00:00 - 23:59:59:24@@ NOTEt The set change is not reflected if the time code setting screen is closed without confirming the setting value.t Set the number of frames with a value that is a multiple of four when the recording frame frequency of [REC FORMAT] is set to 23.98p. The recordedtime code will shift with any other value.
