Panasonic AJ-UPX360ED Operating Instructions Manual

Also see for AG-CX350: Manual Operating instructions Manual Manual How to connect

– 168 –Chapter 7 Output and Screen Display — Screen status displayf : When set to the wireless LAN and the ROP is not connectedf : When set to the wireless LAN and the ROP is connectedf : When set to the wireless LAN and the wireless LAN is not operating properlyf : When set to the wired LAN and the ROP is not connectedf : When set to the wired LAN and the ROP is connectedf : When set to the wired LAN and the wired LAN is not operating properlyf (No display): When both the wireless LAN and the wired LAN are disabled16 Power status: Displays the remaining battery level while powered with the battery. (The battery status display will change as → → → →→ while the remaining battery level gets lower. It will flash in red when the remaining battery level is zero.): Displayed when powered with the AC adaptor.17 Audio level meterDisplays the audio level meter.When P2 or MOV is set as the recording format, the audio channel displayed in the audio level meter follows the setting in the [AUDIO] menu →[OUTPUT SETTINGS] → [AUDIO OUT].f Displays the audio channel 1 and audio channel 2 when set to [CH1]/[CH2]/[CH1/2 STEREO]/[CH1/2 MIX].f Displays the audio channel 3 and audio channel 4 when set to [CH3]/[CH4]/[CH3/4 STEREO]/[CH3/4 MIX].f Switches the audio channel to display in the audio level meter (audio channel 1/2 and audio channel 3/4) while the USER button to which [AUDIOMON SEL] is assigned is pressed or the USER button icon is touched.A white frame is displayed at the position of the reference level set in the [AUDIO] menu → [REC CH SETTINGS] → [HEAD ROOM]. (Eighth fromthe left when set to [20dB], ninth from the left when set to [18dB], and 12th from the left when set to [12dB])f : Displayed when audio cannot be recorded. (Such as when the variable frame rate recording function is enabled, and the frame rate is setdifferent from the system frequency.)18 Luminance of Y GETDisplays the luminance level in unit of [%] or [STOP] when the Y GET function is operating. ([STOP] is displayed as [ST])The display unit follows the setting in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST] → [Y GET UNIT].The display unit is fixed to [%] when the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE] is set to [dB].19 GainDisplays the gain value in unit of [dB] or [ISO].The display unit follows the setting in the [CAMERA] menu → [SW MODE] → [GAIN/ISO MODE].The display unit is fixed to [dB] when the [SYSTEM] menu → [COLOR SETTING] is set to [NORMAL].f [AGC]: Displayed when the auto gain control is operating.20 ND filterDisplays the transmittance of the selected ND filter.f [ND1/64]: Reduces the amount of light entering the MOS sensor to 1/64.f [ND1/16]: Reduces the amount of light entering the MOS sensor to 1/16.f [ND1/4]: Reduces the amount of light entering the MOS sensor to 1/4.f [ND:CLR]: The ND filter is not used.21 Date and time informationDisplays the date and time information. It is not displayed when the time stamp function is enabled.The display contents follow the setting in the [VIDEO OUT/LCD/VF] menu → [INDICATOR] → [DATE/TIME]. (page 91)The display order for the year, month, and date follows the setting in the [OTHERS] menu → [CLOCK] → [DATE FORMAT].Displays in the yyyy mmm dd hh:mm:ss format when set to [Y-M-D].Displays in the mmm dd yyyy hh:mm:ss format when set to [M-D-Y].Displays in the dd mmm yyyy hh:mm:ss format when set to [D-M-Y].f mmm: Month (JAN (January), FEB (February), MAR (March), APR (April), MAY (May), JUN (June), JUL (July), AUG (August), SEP (September),OCT (October), NOV (November), DEC (December))f dd: Datef yyyy: Yearf hh: Hourf mm: Minutef ss: Second22 Shutter speedDisplays the shutter speed.Display of [sec] and [deg] can be switched with the [SCENE FILE] menu → [SYNC SCAN TYPE] during synchro scan. Displayed in time (minutes)display when set to [sec], and in aperture angle when set to [deg].It is not displayed when the shutter function is disabled.f [A.SHTR]: Displayed when the auto shutter is operating.23 Auto iris control statusDisplays the control status of the auto iris.f [STD]: Standard auto iris controlf [SPOT]: Auto iris control for spot lightf [BACK]: Auto iris control for the backlight compensation24 High-sensitivity modef [H.SENS.]: Displayed when set to the [SYSTEM] menu → [SHOOTING MODE] → [HIGH SENS.].25 IrisDisplays the F value.Displays the target value of the auto iris level when the auto iris level function is enabled in the auto iris.