Panasonic AJ-UPX360ED Operating Instructions Manual

Also see for AG-CX350: Manual Operating instructions Manual Manual How to connect

– 101 –Chapter 4 Operation — Menu settings[PRIMARY DNS] Sets the primary DNS server.f Factory setting: [::][SECONDARY DNS] Sets the secondary DNS server.f Factory setting: [::][WLAN PROPERTY]Performs settings related to the wireless LAN.[MAC ADDRESS]Displays the wireless LAN MAC address of the camera. (Cannot be changed)[TYPE]Sets the connection method to the wireless LAN.[DIRECT] It can connect directly without using a wireless access point to a device equipped with wireless LAN such as a tabletterminal.[INFRA(SELECT)] Connects to the wireless access point. The access point is selected from the list.[INFRA(MANUAL)] Connects to the wireless access point. Wireless access point is entered manually.(Factory setting: [DIRECT])[SSID]Enters or displays the network name of the camera (SSID). (32 characters or less)(Factory setting: [AG-CX350]/[AJ-UPX360])[BAND]Switches between two communication methods ([2.4GHz] or [5GHz]) when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] isselected.The items that can be set are as follows.f [2.4GHz], [5GHz](Factory setting: [2.4GHz])[CHANNEL(2.4GHz)]Sets the channel to be used when connected to the wireless LAN with following items set.f The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]f The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [2.4GHz]The items that can be set are as follows.f [AUTO], [CH1], [CH6], [CH11](Factory setting: [AUTO])[CHANNEL(5GHz)]Sets the channel to be used when connected to the wireless LAN with following items set.f The [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT]f The [NETWORK] menu → [WLAN PROPERTY] → [BAND] → [5GHz]The items that can be set are as follows.f [AUTO], [CH36], [CH40], [CH44], [CH48], [CH100], [CH104], [CH108], [CH112], [CH116], [CH132], [CH136], [CH140], [CH149], [CH153], [CH157],[CH161], [CH165](Factory setting: [AUTO])@@ NOTEt Some items may not be able to select depending on the used wireless module.[ENCRYPTION]Sets the encryption method when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [INFRA(SELECT)]/[INFRA(MANUAL)] is selected.The items that can be set are as follows.f [WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE](Factory setting: [WPA2-AES])@@ NOTEt The setting is fixed to [WPA2-AES] when the [NETWORK] menu → [WLAN PROPERTY] → [TYPE] → [DIRECT] is set.[ENCRYPT KEY]Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64 digits.(Factory setting: [01234567890123456789abcdef])