Panasonic AJ-UPX360ED Operating Instructions Manual

Also see for AG-CX350: Manual Operating instructions Manual Manual How to connect

– 100 –Chapter 4 Operation — Menu settings- [1280×720-60fps 14M], [1280×720-60fps 10M], [1280×720-60fps 6M](Factory setting: [1280×720-60fps 10M])@@ NOTEt Cannot be set when [FILE FORMAT] is set to [AVCHD] or [REC FORMAT] is set to UHD or 1080/23.98p.[MULTICAST]Enables/disables the multicast function.(Factory setting: [DISABLE])[MULTICAST ADDRESS]Sets the address when using the streaming with the multicast.(Factory setting: [239.192.0.20])[MULTICAST PORT]Sets the port number when using the streaming with the multicast.(Factory setting: [37004])[CLEAR ACTIVATION]Clears the activation license information that is saved.The items that can be selected are as follows.f [YES], [NO][LAN PROPERTY]Performs settings related to the wired LAN.[MAC ADDRESS]Displays the MAC address for the wired LAN of the camera. (Cannot be changed)[IPv4 SETTING][DHCP] Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the camera.[OFF]: Does not use DHCP.[CLIENT]: Acquires automatically with DHCP.The address from 192.168.0.10 through 192.168.0.255 is automatically assigned when the IP address cannot be acquiredautomatically within one minute.[SERVER]: Enables the DHCP server function of the camera.f Factory setting: [OFF][IP ADDRESS] Sets the IP address.f Factory setting: [192.168.0.1]@@ NOTEt Cannot be set when [LAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.[SUBNET MASK] Sets the subnet mask.f Factory setting: [255.255.255.0]@@ NOTEt Cannot be set when [LAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.[DEFAULT GATEWAY] Sets the default gateway.f Factory setting: [192.168.0.254]@@ NOTEt Cannot be set when [LAN PROPERTY] → [IPv4 SETTING] → [DHCP] → [CLIENT] is selected.[PRIMARY DNS] Sets the primary DNS server.f Factory setting: [0.0.0.0][SECONDARY DNS] Sets the secondary DNS server.f Factory setting: [0.0.0.0][IPv6 SETTING][ENABLE/DISABLE] Sets whether to use IPv6.[ENABLE]: Uses IPv6.[DISABLE]: Does not use IPv6.f Factory setting: [DISABLE][DHCP] Sets whether to use automatic acquisition via DHCP.[OFF]: Does not use DHCP.[CLIENT]: Performs automatic acquisition through DHCP.f Factory setting: [OFF][IP ADDRESS] Sets the IP address.f Factory setting: [::][PREFIX LENGTH] Sets the prefix length of the subnet.f Factory setting: [64][DEFAULT GATEWAY] Sets the default gateway.f Factory setting: [::]