56Setup menus (continued)USER menu No./ItemDescription660UMID RECThis selects whether or not to recordthe UMID information on the card.0000OFF :UMID information is not recorded onthe card. In addition, EE outputsignals are blanked.0001ON :UMID information is recorded on thecard.Note:If THRU has been selected as the setupmenu item No. 106 (EE MODE SEL)setting, UMID information of the EEoutput signals will be blanked.661UMID GENThis selects the UMID information to berecorded on the card when ON has beenselected as the setup menu item No. 660(UMID REC) setting.0000INT :Newly created UMID information ofthis unit is always recorded.0001EXT :The UMID information of the inputsignals is recorded.Newly created UMID information ofthis unit is recorded if there is noUMID information on the input signals.662UMID POSThis sets the line on which the UMIDinformation is to be superimposed.Note:The line selected for the setup menuitem No. 501 (VITC POS-1) and No. 502(VITCPOS-2)settingscannotbeselected for this item.[625i system]0000BLANK000118L::001017L::001522L[525i system]0000BLANK000112L::000617L::000819LThe underlined items indicates the initial setting.No./ItemDescriptionUSER menu 701CH1 IN LVThis selects the audio input (CH1)reference level switching.00004dB00010dB0002–20dB702CH2 IN LVThis selects the audio input (CH2)reference level switching.00004dB00010dB0002–20dB703CH3 IN LVThis selects the audio input (CH3)reference level switching.00004dB00010dB0002–20dB704CH4 IN LVThis selects the audio input (CH4)reference level switching.00004dB00010dB0002–20dB706CH1 OUT LVThis selects the audio output (CH1)reference level switching.00004dB00010dB0002–20dB707CH2 OUT LVThis selects the audio output (CH2)reference level switching.00004dB00010dB0002–20dB708CH3 OUT LVThis selects the audio output (CH3)reference level switching.00004dB00010dB0002–20dB709CH4 OUT LVThis selects the audio output (CH4)reference level switching.00004dB00010dB0002–20dB