Using USB Connectors and SD Memory Cards: Using SD Memory Cards 89 Using USB Connectors and SD Memory CardsUsing SD Memory CardsYou can use SD memory cards on this unit.Use the following procedure to display SD memory cardstatus on screen for checking.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to choose [PROPERTY] –[DEVICE] – [SD CARD] and press the SET button.The following information may also appear depending oncard status.• This unit cannot record proxies.4 Press the SET button and the MENU button to endprocessing.Use the following procedure to format an SD memory cardinserted in an SD memory card slot.1 Open the thumbnail screen.2 Press the MENU button.3 Use the cursor buttons to select [OPERATION] –[FORMAT] – [SD CARD].4 Select [YES] and press the SET button.The card is now formatted.◆ NOTE:• To cancel formatting, select [NO] and press the SET button.5 Press the SET button (check) when the completionmessage appears.◆ NOTE:• Repeat the procedures in steps 2 to 4 to format P2 cards in otherP2 card slots.6 Press the MENU button to end processing.Displaying Miscellaneous SDMemory Card InformationSD STANDARD: Indicates that an SD memorycard is formatted according tothe SD standard.SUPPORTED: Complies with SDNOT SUPPORTED: Does notcomply with SDUSED: Used capacity (bytes)BLANK: Free space (bytes)TOTAL: Total capacity (bytes)NUMBER OF CLIPS: The number of clips on an SDmemory card when clips havebeen copied to an SD memorycard using a proxy or a P2camera recorder.PROTECT: Write protectedFormatting SD Memory Cards
