Panasonic AJ-HPM100E Operating Instructions Manual

Also see for AJ-HPM100E: Operating instructions Mechanical Parts List Brochure & specs

Contents

Panasonic AJ-HPM100E Operating Instructions Manual Manual pdf 20 page image

20 Introduction: Control Reference Guide1. 9-inch Color LCD MonitorThumbnail screens facilitate video searches andchecks.2. Card LockThis lever locks the cards in place when the top panelis closed. Set the lever to ON before closing the toppanel.3. P2 Card Access LEDsThese LEDs indicate P2 card status.➝For details, refer to “P2 Card Access LEDs and P2Card Status.”4. P2 Card SlotsInsert P2 cards into these slots.Firmly insert the card until the EJECT button pops out.After inserting a card, fold the EJECT buttondownward.5. EJECT buttonUse this button to remove a P2 card inserted in a P2card slot. Raise the button and press it in firmly. Do notuse the EJECT button when a P2 card access LEDflashes orange.➝For details, refer to “P2 Card Access LEDs and P2Card Status.”6. Stereo speakersOutputs the audio monitor sound.7. LEVEL controlAdjusts the sound volume of the internal speaker andheadphones.8. BRIGHTNESS controlAdjusts the brightness of the LCD monitor.However, it cannot adjust the brightness of time codesand other superimposed indications.9. BACKLIGHT switchSwitches the brightness of the LCD panel backlight asshown below.10.SUPER switchSwitches the super output as follows.Panel Control Unit and Card SlotsOFF ONCARD LOCK161098765432LIGHT: BrightDARK: DarkOFF: Turns the LCD offON: Outputs the time code and othersuperimposed information to the LCDmonitor and monitor output image.OFF: Does not output any superimposedinformation.