Panasonic AJ-HPM100E Operating Instructions Manual

Also see for AJ-HPM100E: Operating instructions Mechanical Parts List Brochure & specs

Contents

Panasonic AJ-HPM100E Operating Instructions Manual Manual pdf 85 page image

Using USB Connectors and SD Memory Cards: Using This Unit With a Hard Disk 85 Using USB Connectors and SD Memory Cards7 When the confirmation message appears again,select [YES] and press the SET button.This starts hard disk formatting.A TYPE S hard disk allows you to export data to a hard disk(by writing data from a P2 card to a hard disk) in P2 card units.First use this unit to format the hard disk. Up to 15 cards canbe exported to a hard disk.The exported data from a P2 card is recognized as a separatedrive on a computer.1 Switch to the USB host mode.2 Connect a USB hard disk.If the hard disk has not been formatted by this unit, use thisunit to format it.➝For details, refer to “Formatting Hard Disks.”3 Insert a P2 card4 Open the thumbnail screen.5 Press the MENU button.6 Use the cursor buttons to choose [HDD] –[EXPORT].7 Select the number of the source P2 card slot andpress the SET button.8 Select [YES] and press the SET button.This starts exporting.◆ NOTE:• A progress bar appears during exporting.• To interrupt exporting, press the SET button, select [YES] in thecancel confirmation screen and press the SET button again.• The export operation will end earlier if the verify setting is notengaged.To turn off this setting, choose [HDD] – [SETUP] – [VERIFY] –[OFF].• P2 card copying will complete even if processing is interruptedduring verification.When the export operation ends, “COPY COMPLETED!”appears.Exporting to a Hard Disk in Card Units