Panasonic 2 Line KX-TG9541C Operating Instructions Manual

Also see for 2 Line KX-TG9541C: Quick guide

Making cellular callsImportant:R Only 1 cellular line can be used at a time.R Before making calls, confirm that thecorresponding CELL indicator on the base unitlights up (page 15).1 Lift the handset and dial the phone number.R To correct a digit, press MCLEARN.2 MCELLNR The unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to make cellular calls(page 20).Go to step 4.3 MbN: Select the desired cellular phone. aMSELECTN4 When you finish talking, press MOFFN or placethe handset on the base unit or charger.Note:R To switch to the speaker, press MZN.To switch back to the receiver, press MZN/M N.Adjusting the receiver or speaker volumePress MDN or MCN repeatedly while talking.Making a cellular call using the redial listThe last 5 phone numbers dialed are stored in theredial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired phone number.3 MCELLNR The unit starts dialing when:– only 1 cellular phone is paired.– a specific line is set to make cellular calls(page 20).4 MbN: Select the desired cellular phone. aMSELECTNErasing a number in the redial list1 MEN REDIAL2 MbN: Select the desired phone number. aMERASEN3 MbN: “Yes” a MSELECTN4 MOFFNMaking landline calls1 Lift the handset and dial the phone number.R To correct a digit, press MCLEARN.2 M NR An available line is automatically selected.To change the line selection mode, seepage 17.R You can also select the line manually bypressing ML1N or ML2N.3 When you finish talking, press MOFFN or placethe handset on the base unit or charger.Note:R The LINE 1 indicator or LINE 2 indicator on thebase unit lights up while using the handset.Using the speakerphone1 Dial the phone number and press MZN.2 When you finish talking, press MOFFN.Note:R To switch back to the receiver, press MZN/M N.Making a call using the redial listThe last 5 phone numbers dialed are stored in theredial list (each 48 digits max.).1 MEN REDIAL2 MbN: Select the desired phone number.3 M NPause (for PBX/long distance service users)A pause is sometimes required when making callsusing a PBX or long distance service. Whenstoring a calling card access number and/or PIN inthe phonebook, a pause is also needed(page 34).Example: If you need to dial the line accessnumber “9” when making outside calls with a PBX:1 9 a MDN (Pause)2 Dial the phone number. a M NNote:R A 3.5 second pause is inserted each time MDN(Pause) is pressed.22Making/Answering Calls Using the HandsetTG9541C(en)_0723_ver012.pdf 22 2013/07/23 12:24:52