OHAUS FD3 Instruction Manual

Also see for FD15: Instruction manual Service manual User guide Quick start guide Instruction manual

OHAUS FD3 Instruction Manual Manual pdf 16 page image

FD Series EN-10Automatic Tare (Refer to Section 3.7.3)Auto-tare is a convenience feature that automatically tares the initial weight (such as an emptycontainer) placed on the empty pan, without having to press the TARE button. The tare value is clearedautomatically when the weight on the pan is fully removed.Remote Tare (Foot Switch)Taring with the optional foot switch is equivalent to pressing the Tare button.3.3.5 Displaying Gross, Net and Tare ValuesWhen a tare has been entered, pressing the G/N/T button successively displays the Tare (TAREindicator turns on), the Gross, and the Net weights (NET indicator turns on). After a few secondsthe scale automatically reverts to displaying the NET weight.3.3.6 Changing Unit of MeasurePress and hold theUnits button until the desired unit is displayed. If one of the available units is notdisplayed, enable it as described in Section 3.7.4.3.4 Menu3.4.1 Menu StructureThe FD Series menu structure consists of three levels: Main, Sub-menu, and Menu item. The Mainmenu contains the Sub-menus and each Sub-menu contains several Menu items. Each Menu itemcontains two or more settings.TABLE 3-2. MENU STRUCTURE.Main menuSub-menuMenu itemPNOTE: LFT menu item and LOCK sub menu will not appear in FDxxH modelsVisit www.balances.com to see the full line of Ohaus BalancesBuy your next Ohaus Balance online at https://scaleman.com/