OHAUS FD3 Instruction Manual

Also see for FD15: Instruction manual Service manual User guide Quick start guide Instruction manual

OHAUS FD3 Instruction Manual Manual pdf 15 page image

EN-9 FD Series3.2 Control FunctionsFour multi-function buttons are used to operate the scale.3.3 Basic Operation3.3.1 Turning OnWith the scale off, press the ON/ZEROOff button. The scale performs a display test, then displayszero.3.3.2 Turning OffWith the scale on, press and hold the ON/ZEROOff button until OFF is displayed.3.3.3 Z e r o i n gRemove the load from the pan and press the ON/ZEROOff button to set the display to zero. TheCenter of Zero indicator turns on when the measurement is within ±1/4 d of the zero setting.3.3.4 TaringSemi-automatic Tare (Tare Button)To store or change the Tare value, place an empty container on the pan and press the TARE button.The Net weight and NET indicator will be displayed.To clear the Tare value, remove the container from the pan and press the TARE button. The NETindicator turns off and the gross weight will be displayed.ButtonPrimaryFunction(shortpress)SecondaryFunction(long press)ON / ZERO• If scale is off,turns scale onG/N/TMomentarilyDisplaysGross Net andTare valuesTARGETInitiates targetsetting modeTARE• Sets tare• Clears tare, ifpan is emptyOffIf scale is on, turnsscale offUnitsChangesweighing unitMenuEntersmenu mode NoneTargetSettingFunctionShifts to nextdigitAccepts currentdisplayed valueChanges sign(+ / -) ofdisplayed valueIncrementsvalue of theactive digitMenuFunctionYesAccepts currentsetting andadvances to thenext menu itemExit• Immediatelyexits menumode• Abortscalibrationin progressNoRejects currentsetting or menuitem andadvances to thenext availableitemBackReverts back toprevious menuitem• If scale is on,sets zeroVisit www.balances.com to see the full line of Ohaus BalancesBuy your next Ohaus Balance online at https://scaleman.com/