NorthStar EXPLORER 650 Installation And Operation Manual

Also see for EXPLORER 650: Dimensions

Contents

NorthStar EXPLORER 650 Installation And Operation Manual Manual pdf 44 page image

Northstar Explorer 650 Installation and Operation Manual4410 Gauges displayThe Gauges display shows boat data, such aswater speed, as analog or digital gauges.To go to the Gauge display, press andselect Chart, then Chart+Gauges or selectSonar then Sonar+Gauges.If necessary, press twice to switch to theGauges display (see section 2-7-1).Before using the Gauge display, set Speedrange, Max RPM and Max fuel flow (seesection 17-11).Changing the Gauges display1 Go to the Gauges display and press .2 To select the gauge type.i Select Gauge type.ii Select Analog (round) or Digital(numbers).3 To select the gauge size.i Select Gauge size.ii Select Small, Medium or Large.4 To change the data displayed:i Select Gauge setup.ii Change a gauge:a Press the cursor keys to highlightthe gauge.b Press to display a menu ofdata items.c Select a data item that is availableon your system.iii Repeat the above step to set the othergauges.5 Press to return to the Gauges display.