NorthStar EXPLORER 650 Installation And Operation Manual

Also see for EXPLORER 650: Dimensions

Contents

NorthStar EXPLORER 650 Installation And Operation Manual Manual pdf 11 page image

11Northstar Explorer 650 Installation and Operation Manuala To change a tick boxmeans On or Yesmeans Off or No.Press or to change the tick box.b To select an option1 Press to display the menu of options.2 Press or to move the highlight to theoption you want, then press .c To change a name or number:1 Press to display the name or number:2 Press or to select a letter or digit tochange. Press or to change the letter ordigit.Repeat this to change other letters ornumbers.3 Press to accept the new value. Or pressto ignore the changes.d To change a slider valuePress to decrease the value or to increasethe value.2-2 Turning on and off / auto powerTurning on manuallyIf the Explorer is not wired for auto power, pressto turn the unit on. If necessary, adjust thedisplay to be easy to read (see section 2-3).Note: If the Explorer is not wired for auto powerthen the Explorer does not record engine hoursand might not record fuel consumption (seesection 18-4).Turning off manuallyIf the Explorer is not wired for auto power or ifthe ignition switch is off, hold down until thedisplay turns off.Auto powerIf the Explorer is wired for auto power (seesection 18-4), then:• The Explorer automatically turns on when youturn the boat’s ignition switch on.• You can not turn the Explorer off while theignition switch is on.• If Auto power off (see section 17-1) is , theExplorer automatically turns off when youturn the boat’s ignition switch off.• If Auto power off (see section 17-1) is , theExplorer stays on when you turn the boat’signition switch off. You can now turn theExplorer off manually.