Page 4-24 NDA-24230 Issue 2.0Chapter 4 VisuaLink 128/384 User GuideRemote Controller Directions:Gives some general directions for configure the VisuaLink system. Using theRemote controller highlight the NEXT option to advance to the configure screenor press the lower portion of the CAMERA CONTROL key to highlight theConfigure Later to advance to the normal ICON screens. If you choose toconfigure later, the system will have to be programmed with My numbers andSPID’s in order to work correctly.4.4 Setting Up yourISDN LineInformationThe following is a description of BRI Line setupPart 1- Remote Controller Location- Locate the CAMERA control.The CAMERA control key is the BLUE roundkey. Use this key to move the Cursorup/down and Left/Right in the ConfigurationScreens.- Locate the ENTER key on the Wireless remotecontroller.Use the ENTER key to confirm selectionsand store information.Next screenPrior screensPart 2- Setting up Your ISDN LineIntroduction:When ordering BRI service, you will usually get2 My numbers and 2 SPID numbers per BRI.A SPID normally consists of the user’s 3 digitarea code, 7 digit ISDN telephone number,followed by a 0101. Ex:MY Number 1: 9727195854SPID 1: 97271958540101Note: The VisuaLink 128 requires 2 My numbersand 2 SPID #, while the VisuaLink 384requires 6 My numbers and 6 SPID #.Next screenPrior screensNote is yellow.
