NDA-24230 Issue 2.0 Page 7-7VisuaLink 128/384 User Guide Chapter 77.3 Camera PresetMenuDuring a videoconference, you may want the camera to point at a particularperson or location, such as at the main speaker or at a flipchart. Camera presetsare buttons that let you store camera positions for the main and sub-camera. Afteryou set a camera preset, all you have to do is press one numerical button to makethe main or sub-camera move to that stored preset.To set camera preset button:¬ Set the camera to the desired position. Adjust the image using CAMERACONTROL and ZOOM buttons. Keep doing this until the camera isshowing the image exactly the way you want it.Á Press the MENU button to display the on-screen icons. Select REGISTRATING THE CAMERA PRESET POSITION iconusing the left or right side of the CAMERA CONTROL button.à Press ENTER button.Note: Camera preset selection allows two setting: NEAR END and FAR END.sRegistering the camera preset position.ENTERCAMERACONTROLCamera Preset Select : Press ENTER after choosing.
