NDA-24230 Issue 2.0 Page 4-23VisuaLink 128/384 User Guide Chapter 44.3 Software Setup When you first turn on your VisuaLink, there will be an initial configurationscreen. These configuration screens will have to be completed before your systembecomes operational.Start up configuration screensThe following are the startup screens that will be active on first power up or acti-vated on demand by the user after choosing the Environmental initialize.Welcome Screen:This is a welcome screen for the User.VisuaLinkThank you for purchasing one of the mostsimple and portable video conferencing systemsavailable.We will now show you how to set up your system.This will only have to be done once.NOTE: If remote controller doesn’t work, makesure the switch setting of D30 camera IRout is ON. Switch is located on thebottom of the camera.Click here to continueConfigure latersNote is yellow.
