NEC V302X User Manual

Also see for V302H: Installation guide

Contents

NEC V302X User Manual Manual pdf 71 page image

64English ...User Controls1. Turn on DHCP to allow the DHCP server to automatically assignan IP, or manually enter the required network information.ENTER CURRENT SECURITY CODESECURITY KEYWORDEXITENTERINVALID-KEYWORD TOO SHORTNETWORKNETWORK STATUS DISCONNECTDHCPIP ADDRESSSUBNET MASKGATEWAYAPPLYOFF2. Then choose apply and press ENTER button to complete theconfiguration process.3. Open your web browser and type in from the OSD LAN screenthen the web page will display as below:How to use web browser to control your projector When you used theprojector IP address,you can not link toyour service server. PJLink: Set apassword for PJLink.PJLink is astandardizationof protocol usedfor controllingprojectors of differentmanufacturers. Thisstandard protocol isestablished by JapanBusiness Machine andInformation SystemIndustries Association(JBMIA) in 2005.The projector supportsall the commands ofPJLink Class 1. AMX BEACON:Turn on or off fordetection from AMXDevice Discoverywhen connectingto the networksupported by AMX'sNetLinx controlsystem. CRESTRON ROOM-VIEW compatibility:The projectorsupports CRESTRONROOMVIEW,allowing multipledevices connectedin the network tobe managed andcontrolled froma computer or acontroller.For more information,visit http://www.crestron.com