NEC Display Solutions of America, Inc.V332X/V332W/V302H Installation GuideCeiling Mounted and Desktop Rev 1.0www.necdisplay.com V332X/V332W/V302H Page 1 of 9ContentsProduct Description, Lens Specs, Notes Pg 1Formulas Pg 2-4Diagrams & Distance Charts Pg 5Cabinet Dimensions Pg 6-7Ceiling Mount Dimensions Pg 8Input Panels and Control Codes Pg 9Product DescriptionType: 1-chip DLP projector, Brightness: V302H: 3000 LumensV332X: 0.55” DLP V332X/V332W 3300 LumensV332W/V302H: 0.65” DLPResolution: 1024 x 768 (4:3) Fan Noise: 35dB / 32dB @ 1meter1280 x 800 (16:10)1920 x 1080 (16:9)Dimensions: 12.8 (W) x 4.0” (H) x 9.8” (D) Weight: 6.4 lbsPower Consumption: 280W (max) 944 BTU/hourLens SpecificationsThrow Ratio: 1.5 – 1.8:1 (for 100” diagonal) Focal Length: 22.41mm – 26.82mmOffset Angle: 11.7° - 14.2° (for 100” diagonal) F/#: 2.55 - 2.85Screen Sizes: 30” - 300” diagonal (4:3) Manual Focus/Manual ZoomScreen/Aspect Ratio_Both 16:9 and 4:3 screens are fully supported with proper aspect ratio control for both type sources using NEC developedscaling technology. By selecting the screen type in the menus, Aspect Ratio control is reconfigured for that screen type.Notes For screen sizes not indicated on the projection tables, use the formulas below.If the figures on the tables do not match the results of formulas, use the figures in the table. All calculations are based on a 4:3 aspect ratio. Distances are in inches, for millimeters multiply by 25.4. Distances may vary 5%.