31 ... EnglishInstallationWarning Indicator When the “STATUS” LED indicator flashes red, itindicates the projector has overheated. The projector willautomatically shut itself down.WARNING! TEMPERATURE TOO HIGH1. MAKE SURE AIR IN AND OUTLETS ARE NOT BLOCKED.2. MAKE SURE THE ENVIRONMENT TEMPERATURE IS UNDER 40 DEGREE C When the “LAMP” LED indicator turns red and the messagebelow displays on-screen, the projector has detected thatthe lamp is approaching its end of life. When you see thismessage, change the lamp as soon as possible.WARNING! LAMPLAMP WARNINGLAMP LIFE IS ABOVE LIMIT TIME. LAMP OFF!WARNING! LAMPLAMP WARNINGLAMP LIFE EXCEEDED. When the “STATUS” LED indicator flashes red and themessage below displays on-screen, it indicates the fan failed.Stop using the projector and disconnect the power cord fromthe electrical outlet, then contact your local dealer or ourservice center.WARNING! FAN LOCKEDTHE PROJECTOR WILL SWITCH OFF AUTOMATICALLY.For more informa-tion on STATUS LEDindicator, please see thepage 81-82.
