795. Using On-Screen Menu[GENERAL]Storing Your Customized Settings [REFERENCE]This function allows you to store your customized settings in [PRESET 1] to [PRESET 7].First, select a base preset mode from [REFERENCE], then set [GAMMA CORRECTION] and [COLOR TEMPERA-TURE].HIGH-BRIGHT �������� Recommended for use in a brightly lit room�PRESENTATION ����� Recommended for making a presentation using a PowerPoint file�VIDEO �������������������� Recommended for typical TV program viewing�MOVIE ������������������� Recommended for movies�GRAPHIC ��������������� Recommended for graphics�sRGB ��������������������� Standard color values�DICOM SIM� ���������� Recommended for DICOM simulation format�Selecting Gamma Correction Mode [GAMMA CORRECTION]Each mode is recommended for:DYNAMIC �������������� Creates a high-contrast picture�NATURAL ��������������� Natural reproduction of the picture�BLACK DETAIL ������� Emphasizes detail in dark areas of the picture�NOTE: This function is not available when [DICOM SIM.] is selected for [DETAIL SETTINGS].Selecting Screen Size for DICOM SIM [SCREEN SIZE]This function will perform gamma correction appropriate for the screen size.LARGE ������������������� For screen size of 110"MEDIUM ���������������� For screen size of 90"SMALL ������������������� For screen size of 70"NOTE: This function is available only when [DICOM SIM.] is selected for [DETAIL SETTINGS].Adjusting Color Temperature [COLOR TEMPERATURE]This option allows you to select the color temperature of your choice.NOTE: When [PRESENTATION] or [HIGH-BRIGHT] is selected in [REFERENCE], this function is not available.Adjusting Brightness and Contrast [DYNAMIC CONTRAST]This function allows you to adjust the contrast ratio optically using the built-in iris.To increase the contrast ratio, select [ON].Selecting Still Image Mode or Movie Mode [IMAGE MODE]This function allows you to select the still image mode or the movie mode.STILL ��������������������� This mode is for a still image�MOVIE ������������������� This mode is for a movie�NOTE: This function is available only when [HIGH-BRIGHT] is selected for [REFERENCE].
