261 Turning off the Image and SoundPress the AV-MUTE button to turn off the image and sound for a short period of time.Press again to restore the image and sound.The projector’s power-saving function will work 10 seconds after the image is turnedoff.As a result, the lamp power will be reduced.NOTE:• Even though the image is turned off, the menu still remains on the screen.• Sound from the AUDIO OUT jack (Stereo mini) can be turned off.• Even when the power-saving function works, the lamp power may be restored to its originallevel temporarily.• To restore the image, even if you press the AV-MUTE button immediately after the start ofthe power-saving function, the lamp brightness may not be restored to its original level. Freezing a PicturePress the FREEZE button to freeze a picture. Press again to resume motion.NOTE: The image is frozen but the original video is still playing back.• This feature can not be used when USB-A is selected as the input terminal. Magnifying a PictureYou can enlarge the picture up to four times.NOTE:• The maximum magnification may be less than four times depending on the signal.• This feature can not be used when LAN, and USB-B is selected as the input terminal.To do so:1. Press the D-ZOOM (+) button to magnify the picture.To move the magnified image, use the ,, or button.3. Convenient Features
