NEC PE401H User Manual

Also see for NP-PE401H: Command guide Installation and assembly Installation and assembly manual Quick setup guide User manual

Contents

NEC PE401H User Manual Manual pdf 9 page image

2English ...Usage NoticePrecautionsFollow all warnings, precautions and maintenance as recom-mended in this user’s guide to maximize the life of your unit.■ Warning- This projector will detect the life of the lampitself. Please be sure to change the lamp when itshows warning messages.■ Warning- Reset the “CLEAR LAMP HOURS” functionfrom the on-screen display “OPTIONS |LAMP/FILTER SETTINGS” menu after replacing thelamp module (refer to page 52).■ Warning- When switching the projector off, please ensurethe cooling cycle has been completed beforedisconnecting power.■ Warning- Turn on the projector first and then the signalsources.■ Warning- When the lamp reaches the end of its life, it willburn out and may make a loud popping sound.If this happens, the projector will not turn backon until the lamp module has been replaced. Toreplace the lamp, follow the procedures listedunder “Replacing the Lamp”.Turkish RoHS information relevant for Turkish marketEEE Yönetmeliğine Uygundur.This device is not intended for use in the direct field of viewat visual display workplaces. To avoid incommoding reflec-tions at visual display workplaces this device must not beplaced in the direct field of view.High gain type screens are not optimal for use with thisprojector. The lower the screen gain (i.e., screen gain on theorder of 1), the better the appearance of the projected image.