NEC PE401H User Manual

Also see for NP-PE401H: Command guide Installation and assembly Installation and assembly manual Quick setup guide User manual

Contents

NEC PE401H User Manual Manual pdf 83 page image

76English ...AppendicesPC Control Codes and Cable ConnectionPC Control CodesFunction Code DataPOWER ON 02H 00H 00H 00H 00H 02HPOWER OFF 02H 01H 00H 00H 00H 03HINPUT SELECT COMPUTER 02H 03H 00H 00H 02H 01H 01H 09HINPUT SELECT HDMI 1 02H 03H 00H 00H 02H 01H 1AH 22HINPUT SELECT HDMI 2 02H 03H 00H 00H 02H 01H 1BH 23HINPUT SELECT VIDEO 02H 03H 00H 00H 02H 01H 06H 0EHINPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13HPICTURE MUTE ON 02H 10H 00H 00H 00H 12HPICTURE MUTE OFF 02H 11H 00H 00H 00H 13HSOUND MUTE ON 02H 12H 00H 00H 00H 14HSOUND MUTE OFF 02H 13H 00H 00H 00H 15HNOTE: Contact your local dealer for a full list of the PC Control Codes if needed.Cable ConnectionCommunication ProtocolBaud rate ....................................................38400 bpsData length .................................................8 bitsParity ...........................................................No parityStop bit ........................................................One bitX on/off........................................................NoneCommunications procedure ....................Full duplexPC Control Connector (D-SUB 9P)3 4 5219876NOTE 1: Pins 1, 4, 6 and 9 are no used.NOTE 2: Jumper “Request to Send” and “Clear to Send” together on both ends of the cable to simplify cable connection.To TxD of PCTo RxD of PCTo GND of PCTo RTS of PCTo CTS of PC