NEC PE401H User Manual

Also see for NP-PE401H: Command guide Installation and assembly Installation and assembly manual Quick setup guide User manual

Contents

NEC PE401H User Manual Manual pdf 57 page image

50English ...User ControlsStep 2: Select apply and press the ENTER button on the remote control or the controlpanel to submit function or press the MENU button on the remote control orthe control panel to exit.Step 3: To open Network Connections, click Start, click Control Panel, click Networkand Internet Connections, and then click Network Connections. Click theconnection you want to configure, and then, under Network Tasks , clickChange settings of this connection.Step 4: On the General tab, under Thisconnection uses the followingitems, click Internet Protocol(TCP/IP), and then click“Properties.”Step 5: Click Use the following IPaddress, and type in as below:1) IP address: 192.168.0.102) Subnet mask: 255.255.255.03) Default gateway:192.168.0.1Step 6: To open Internet Options, clickIE web browser, click InternetOptions, click the Connections taband click “LAN Settings...”Step 7: The Local Area Network (LAN)Setting dialog box appears, Inthe Proxy Server area, cancel theUse a proxy server for your LANcheck box., then click “OK” buttontwice.Step 8: Open your IE and type in the IPaddress of 192.168.0.10 in the URLthen press the ENTER button key.Step 9: Open “Projector Status andControl” to control your projector.