855. Using On-Screen MenuSetting Closed Caption [CLOSED CAPTION]This option sets several closed caption modes that allow text to be superimposed on the projected image of Videoor S-Video.OFF ������������������������ This exits the closed caption mode�CAPTION 1-4 ��������� Text is superimposed�TEXT 1-4 ���������������� Text is displayed�NOTE:• The closed caption is not available under the following conditions:- when messages or menus are displayed.- when an image is magnified, frozen, or muted.• Portions of superimposed text or closed caption may be truncated. If that happens, try to place the superimposed text orclosed caption within the screen.Using Off Timer [OFF TIMER]1. Select your desired time between 30 minutes and 16 hours: OFF, 0:30, 1:00, 2:00, 4:00, 8:00, 12:00, 16:00.2. Press the ENTER button on the remote control.3. The remaining time starts counting down.4. The projector will turn off after the countdown is complete.NOTE:• To cancel the preset time, set [OFF] for the preset time or turn off the power.• When the remaining time reaches 3 minutes before the projector is turned off, the [THE PROJECTOR WILL TURN OFF WITHIN 3MINUTES] message will be displayed on the bottom of the screen.Selecting Menu Language [LANGUAGE]You can choose one of 29 languages for on-screen instructions.NOTE: Your setting will not be affected even when [RESET] is done from the menu.[MENU]Selecting Menu Color [COLOR SELECT]You can choose between two options for menu color: COLOR and MONOCHROME.Turning On / Off Source Display [SOURCE DISPLAY]This option turns on or off input name display such as COMPUTER 1, COMPUTER2, HDMI, VIDEO, S-VIDEO,VIEWER, NETWORK, USB DISPLAY, to be displayed on the top right of the screen.When no input signal is present, the no-signal guidance prompting you to check for an available input will be displayedat the center of the screen. When the [VIEWER] or [NETWORK] item is selected for [SOURCE], the no-signal guid-ance will not be displayed.
