614. Using the Viewer❷ Projecting images stored in a USB memory deviceThis section explains the basic operation of the Viewer.The explanation provides the operational procedure when the Viewer toolbar (→ page 65) is set to the factory de-fault.- Starting the Viewer .......................................................................below- Removing the USB memory from the projector ....................... page 63- Exiting the Viewer..................................................................... page 63Preparation: Before starting the Viewer, store images to the USB memory using your computer.WIRELESSWIRELESSStarting the Viewer1. Turn on the projector. (→ page 15)2. Insert the USB memory into the USB port of the projec-tor.• Do not remove the USB memory from the projector whileit’s LED flashes. Doing so may corrupt the data.3. Press the SOURCE button on the projector cabinet.The Viewer start screen will be displayed.• Press the VIEWER button on the remote control.
