91. IntroductionRemote Control Precautions• Handle the remote control carefully.• If the remote control gets wet, wipe it dry immediately.• Avoid excessive heat and humidity.• Do not short, heat, or take apart batteries.• Do not throw batteries into fire.• If you will not be using the remote control for a long time, remove the batteries.• Ensure that you have the batteries’ polarity (+/−) aligned correctly.• Do not use new and old batteries together, or use different types of batteries together.• Dispose of used batteries according to your local regulations.Operating Range for Wireless Remote Control30°30°30°30°22 feet/7 m22 feet/7 mRemote controlRemote sensor on projector cabinetRemote control• The infrared signal operates by line-of-sight up to a distance of about 22 feet/7 m and within a 60-degree angle ofthe remote sensor on the projector cabinet.• The projector will not respond if there are objects between the remote control and the sensor, or if strong light fallson the sensor. Weak batteries will also prevent the remote control from properly operating the projector.1 Press firmly and slide the batterycover off.2 Install new batteries (AAA). Ensurethat you have the batteries’ polarity(+/−) aligned correctly.Battery Installation3 Slip the cover back over the bat-teries until it snaps into place. Donot mix different types of batteriesor new and old batteries.OPENOPEN
