NEC MT1075 User Manual

Also see for MT1060 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC MT1075 User Manual Manual pdf 38 page image

E-34USING ON-SCREEN MENUBasic Menu OperationUsing the MenusNOTE: The on-screen menu may not be displayed correctly while interlaced mo-tion video image is projected.1. Press the MENU button on the remote control or projector cabinet todisplay the Basic, Advanced or Custom Menu.NOTE: When using a USB mouse, click the mouse button to display the menu.For other operations, do the same way as you use your PC mouse.2. Press the SELECT buttons on the remote control or the projec-tor cabinet to highlight the menu for the item you want to adjust orset.3. Press the SELECT button or the ENTER button on the remotecontrol or the projector cabinet to select a submenu or item.4. Adjust the level or turn the selected item on or off by using SELECTor buttons on the remote control or the projector cabinet.The on-screen slide bar will show you the amount of increase ordecrease.5. Changes are stored until you adjust it again.ENTER .......... Stores the setting or adjustments.CANCEL ........ Return to the previous screen without storing settingsor adjustments.NOTE: You can close the main and sub menus simultaneously by pressingthe PJ button on the remote control to cancel the Projector mode.6. Repeat steps 2-5 to adjust an additional item, or press the CANCELbutton on the projector cabinet or the remote control to quit the menudisplay.Customizing the MenuThe Custom menu can be customized to meet your requirements. Se-lecting a menu item from the "Custom Menu Edit" list, allows you tocustom tailor the menu items to your needs.1. Select "Custom Menu Edit" to display the "Custom Menu Edit" screen.2. Use the SELECT or buttons to highlight your selection and pressthe ENTER button to place a check mark next to an option.This action enables that feature. Press the ENTER button again toclear the check box.If you select an item with a solid triangle and press the ENTERbutton on the remote control or the projector cabinet, you can enableall the items within that submenu. Also you can turn on an item withinthe submenu without placing a check mark on the main menu item.NOTE: Up to 12 main menu items (within Custom Menu Edit, not includingsubmenu items) can be selected.3. In order for the changes to take effect, use the SELECT or but-ton on the remote control or the projector cabinet to highlight "OK",then press the ENTER button. To cancel the changes, use the SE-LECT or buttons to highlight "Cancel" and press the ENTERbutton.To return to the factory default, select "Reset" then press the ENTERbutton.The default Custom Menu items are:Source Select (RGB 1/2, Video, S-Video, DVI(DIGITAL), Viewer andLAN), Picture, Sound, Image Options (Aspect Ratio), Picture Manage-ment, Projector Options (3D Reform, Menu, Setup, Lamp Setting, Screenand LAN Mode), Tools (Sleep Timer, Capture, PC Card Files andChalkBoard) and Help (Contents and Information).NOTE: Once you have selected OK on the Custom Menu Edit screen, you cannotcancel the changes on the Menu screen. However, you can reedit the menu itemsover again as described in the steps above.NOTE: If the "Advanced Menu" item has been selected on the Menu mode, youget the "Confirmation Change Menu" upon completion of "Custom Menu" editing.In this case, selecting "Yes" then "ENTER" will close all the menus and apply thechanges from the Advanced menu to the Custom Menu. If you select "No" then"ENTER" functions, then all menu items will return to the Advanced menu, butyour changes will still be available within the "Custom Menu" selection. To dis-play the previously tailored Custom Menu, select "Custom Menu" from the "MenuMode".An item "To Advanced Menu" will be added to the bottom of the CustomMenu.Selecting this item and pressing the ENTER button will display the "Ad-vanced Menu" features.