NEC MT1075 User Manual

Also see for MT1060 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC MT1075 User Manual Manual pdf 28 page image

E-24ASPECTOFFVIDEOAUTO ADJ.RGB VIEWERLASERON3D REFORMHELP POINTERVOLUME MAGNIFYZOOMPIC-MUTESLIDEFOLDERSLIDELISTPOWERFREEZEFOCUSASPECTOFFVIDEOAUTO ADJ.RGB VIEWERLASERON3D REFORMHELP POINTERVOLUME MAGNIFYZOOMPIC-MUTESLIDEFOLDERSLIDELISTPOWERFREEZEFOCUSCONVENIENT FEATURESUsing the Remote Mouse FunctionThe built-in remote mouse function enables you to operate yourcomputer's mouse functions from the remote control (Computer mode).It is a great convenience for clicking through your computer-generatedpresentations. To return to the projector operation mode (Projector mode),press the PJ button (lit red).Connecting to your computer for the remote mousefunctionIf you wish to use the remote mouse function, use the supplied USBcable to connect the USB port (PC) of the projector and the USB port(type A) of your computer.NOTE: Depending on the type of connection or OS installed on your computer,you may have to restart your computer or change you computer settings.NOTE: Wait at least 5 seconds after disconnecting the USB cable before recon-necting it and vice versa. The computer may not identify the built-in mouse re-ceiver if it is repeatedly connected and disconnected in rapid intervals.USB port (PC)USB port(Type A)Switching operation mode between computer and projectorThe three shaded buttons shown on the drawing work as a computer mouse in the Computer mode.In the Computer mode the PJ button is not lit.Not litWorks as a mouse for your computer.Works as a right-click buttonfor your computer.Works as the SELECT button on the projector.Lit redWorks as the CANCELbutton on the projector.Works as a left-clickbutton for your com-puter.Works as the ENTERbutton on the projector.When using the USB PortFor PC, the mouse receiver function can only be used with a Windows98, Windows ME, Windows XP or Windows 2000 operating system.• When the MENU button is pressed, the PJ button lights red to indicate that you are in the Projector mode, which allows the projector menuoperation using the three buttons.• When the POINTER button is pressed, the PJ button lights red to indicate that you are in the Projector mode and that the SELECT button works as a moving button for the POINTER or magnified image.• If no buttons are pressed within 60 seconds, the PJ button's light goes out to indicate that you are in the Computer mode. To enable the projectormenu operation again, press the PJ button to light red. To move the pointer or a magnified image again, turn off the pointer and then turn on thepointer (press the POINTER button two times).• When the PJ button is lit, if you want to use the mouse function immediately, press the PJ button to return to the Computer mode (not lit).During Computer mode:In Computer mode, by pressing the ENTER button for 2 seconds or more then releasing, the drag mode is set and the drag operation can beperformed simply by pressing the SELECT (mouse) button. To drop the item, press the ENTER (left click) button again or press theCANCEL (right click) button.