NEC MT1075 User Manual

Also see for MT1060 Series: Supplementary guide Control commands Command guide Command guide Control commands

Contents

NEC MT1075 User Manual Manual pdf 16 page image

E-12312INSTALLATION AND CONNECTIONSThis section describes how to set up your projector and how to connect video and audio sources.To the wall outlet.Setting Up the Screen and the ProjectorSelecting a LocationThe further your projector is from the screen or wall, the larger the image. The minimum size the image can be is approximately 25" (0.64 m)measured diagonally when the projector is roughly 39.4 inches (1.0 m) from the wall or screen. The largest the image can be is 500" (12.7 m) whenthe projector is about 614.2 inches (15.6 m) from the wall or screen. Use the drawing below as a guide.Your projector is simple to set up and use.But before you get started, you must first:zSet up a screen and the projector.xConnect your computer or video equip-ment to the projector. See pageE-14 – 17.cConnect the supplied power cable. Seepage E-17.NOTE: Ensure that the power cable and anyother cables are disconnected before movingthe projector. When moving the projector orwhen it is not in use, cover the lens with thelens cap.300"240"406.4(W)X304.8(H)/160(W)X120(H)365.8(W)X274.3(H)/144(W)X108(H)304.8(W)X228.6(H)/120(W)X90(H)243.8(W)X182.9(H)/96(W)X72(H)203.2(W)X152.4(H)/80(W)X60(H)162.6(W)X121.9(H)/64(W)X48(H)121.9(W)X91.4(H)/48(W)X36(H)81.3(W)X61.0(H)/32(W)X24(H)61.0(W)X45.7(H)/24(W)X18(H)TELE: 50.8(W)X38.1(H)/20(W)X15(H)Lens centerScreen Size1.42.12.83.54.35.36.48.51.11.0200"180"150"120"100"80"60"40"30"25"609.6(W)X457.2(H)/240(W)X180(H)Screen size (Unit: cm/inch)487.7(W)X365.8(H)/192(W)X144(H)7.1Distance (Unit: m)10.6