E – 234. CONNECTIONSWhen used in standalone operationConnecting Your VCR Or Laser Disc PlayerUse common RCA cables (not provided) to connect your VCR or laser disc player to your GT1150 Projector. Tomake these connections, simply:1. Turn off the power to your projector and VCR or laser disc player.2. Connect one end of your RCA cable to the video output connector on the back of your VCR or laser discplayer, connect the other end to the Video input on your projector. Use standard RCA audio patch cords toconnect the audio from your VCR or laser disc player to your projector (if your VCR or laser disc playerhas this capability). Be careful to keep your right and left channel connections correct for stereo sound.3. Turn on the projector and the VCR or laser disc player.NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video outputrequirements.DVI L/MONOL/MONORGB 2RGB 1VIDEO 1VIDEO 2S-VIDEO AUDIO OUTR/Cr G/Y B/CbVH/HVMONITOR OUTRL/MONO RL/MONO R L/MONO RRL/MONO RVCR or other video equipmentTV tunerDVD playerVCRAudio equipment
