NEC GT1150 User Manual

Also see for GT1150 Series: Supplementary guide Specifications Installation guide Installation data Specifications

Contents

NEC GT1150 User Manual Manual pdf 14 page image

E – 6DVIL/MONOL/MONORGB 2RGB 1VIDEO 1VIDEO 2S-VIDEOAUDIO OUTR/CrG/YB/CbVH/HVMONITOR OUTRL/MONO RL/MONO R L/MONO RR158911101213763421. DVI ConnectorThis connector can be used to accept digital or analog signal outputfrom a computer with a DVI connector.2. DVI Audio Input Jacks (RCA)These are the left channel and the right audio inputs for stereo soundcoming from the equipment connected to a computer with DVI output.L/MONOThis is your left channel audio input for stereo sound from the equip-ment connected to a computer with DVI output.The L/MONO jack also serves as your monaural audio input.RThis is your right channel audio input for stereo sound from the equip-ment connected to a computer with DVI output.3. RGB 2 Connector (Mini D-Sub 15 pin)Connect your PC, Macintosh, DVD player with Y/Cb/Cr outputs or otherRGB equipment. The optional Component V. Cable is required for Y/Cb/ Cr input connection.NOTE:The RGB2 connector does not support the Switcher Control mode.4. RGB 2 Audio Input Jacks (RCA)L/MONOThis is your left channel audio input for stereo sound coming from theRGB Input 2 source.This also serves as your monaural audio input.RThis is your right channel audio input for stereo sound from the RGBInput 2 source.Front Terminal Panel (Right)5. MONITOR OUT Connector (Mini D-Sub 15pin)You can use this connector to loop your computerimage an external monitor from either the RGB 1,RGB 2 or DVI analog input source.6. RGB 1 Input Connectors (BNC)Connect R,G,B,H (Horizontal sync) and V (Verticalsync) outputs of external equipment such as the NECISS-6020Switcher.If using a component with a combined sync (SYNC)output, connect it to the H/V terminal. When usingluminance and color-difference signals of HDTV andDVD, connect Pr/Cr to the R,Y to the G and Pb/Cbto the B input of the projector.7. RGB 1 Audio Input Jacks (RCA)L/MONOThis is your left channel audio input for stereo soundcoming from the RGB Input 1 source.This also serves as your monaural audio input.RThis is your right channel audio input for stereo soundfrom the RGB Input 1 source.8. VIDEO 1 Input Connector (BNC)Connect a VCR, DVD player, laser disc player, ordocument camera here to project video.9. VIDEO 2 Input Connector (RCA)Connect a VCR, DVD player, laser disc player, ordocument camera here to project video.10. VIDEO Audio Input Jacks (RCA)L/MONOThis is your left channel audio input for stereo sound coming from theVIDEO 1 or VIDEO 2 source.This also serves as your monaural audio input.RThis is your right channel audio input for stereo sound from the VIDEO1 or VIDEO 2 source.11. S-VIDEO Input Connector (Mini DIN 4 pin)Here is where you connect the S-Video input from an external sourcesuch as a VCR or laser disc player.NOTE: S-Video provides more vivid color and higher resolution than the tradi-tional composite video format.12. S-VIDEO Audio Input Jacks (RCA)L/MONOThis is your left channel audio input for stereo sound coming from theS-VIDEO source.This also serves as your monaural audio input.RThis is your right channel audio input for stereo sound from the S-VIDEO source.13. AUDIO OUT Jacks (RCA)You can use this connector to output sound from the currently selectedinput source (RGB 1, RGB 2, VIDEO 1, VIDEO 2, S-VIDEO or DVI[digital/analog] ). Output sound level can be adjusted in accordancewith the sound level of the internal speaker.