E – 4Attaching the lens hood cap to the lens hood with the supplied string and rivet1. Thread the string through the hole on the lens hood cap. Lens hood capString2. Use the rivet to attach the string to the bottom of the projector.DVIL/MONOL/MONORGB 1RGB 2VIDEO 1VIDEO 2S-VIDEOAUDIO OUTR/CrG/YB/CbVH/HVMONITOR OUTRL/MONO RL/MONORL/MONORRRGB 1S-VIDEOAUDIO OUTG/YB/CbVH/HVL/MONO RL/MONORL/MONORRivetCarrying the ProjectorAlways carry your projector by the handle.Ensure that the power cable and any other cables connecting to video sourcesare disconnected before moving the projector.When moving the projector or when it is not in use, cover the lens with thelens hood cap.CAUTION:Do not put the projector on its side when the lamp is on.Doing so may cause damage to the projector.MENUENTERCANCELSELECTLENS SHIFTLEFTZOOMFOCUSUPDOWNRIGHTAUTOADJUSTLAMPSTATUSPOWERON/STAND BYSOURCE
