Manitowoc S0850M Installation Use And Care Manual

Also see for S0850M: Service manual

Manitowoc S0850M Installation Use And Care Manual Manual pdf 30 page image

Maintenance Section 44-8 Part Number 80-1560-3Water Level Probe1. Remove the water trough.2. The water level probe normally does not requireremoval for cleaning. The probe can be wiped andcleaned in place or proceed to step 3.3. Pull the water level probe straight down todisengage.4. Lower the water level probe until the wiringconnector is visible. Disconnect the wire lead fromthe water level probe.5. Remove the water level probe from the ice machine.Water Pump1. Empty the water trough.A. Move the toggle switch from OFF to ICE.B. Wait 45 seconds.C. Place toggle switch in OFF position.Water Pump Removal2. Remove the water trough.3. The water pump normally does not require removalfor cleaning. The water pump base can be wipedand cleaned in place or proceed to step 4.4. Grasp pump and pull straight down on pumpassembly until water pump disengages andelectrical connector is visible.5. Disconnect the electrical connector.6. Remove the water pump assembly from icemachine.7. Do not soak the water pump in cleaner or sanitizer.Wipe the pump and ice machine base clean.! WarningDisconnect the electrical power to the ice machineat the electrical disconnect before proceeding.SV3141WATER LEVEL PROBE! WarningDisconnect the electric power to the ice machine atthe electric service switch box and turn off the watersupply before proceeding.SV3091WATERPUMP