We reserve the right to make product improvements at any time.Specifications and design are subject to change without notice.Safety NoticesAs you work on a Flake / Chiplet Series Ice Machine, besure to pay close attention to the safety notices in thismanual. Disregarding the notices may lead to seriousinjury and/or damage to the ice machine.Throughout this manual, you will see the following typesof safety notices:Procedural NoticesAs you work on a Flake / Chiplet Series Ice Machine, besure to read the procedural notices in this manual.These notices supply helpful information which mayassist you as you work.Throughout this manual, you will see the following typesof procedural notices:NOTE: Text set off as a Note provides you with simple,but useful, extra information about the procedure you areperforming.Read These Before Proceeding:! WarningPERSONAL INJURY POTENTIALDo not operate equipment that has been misused,abused, neglected, damaged, or altered/modifiedfrom that of original manufactured specifications.! WarningText in a Warning box alerts you to a potentialpersonal injury situation. Be sure to read theWarning statement before proceeding, and workcarefully.! CautionText in a Caution box alerts you to a situation inwhich you could damage the ice machine. Be sureto read the Caution statement before proceeding,and work carefully.ImportantText in an Important box provides you withinformation that may help you perform a proceduremore efficiently. Disregarding this information willnot cause damage or injury, but it may slow youdown as you work.! CautionProper installation, care and maintenance areessential for maximum ice production and trouble-free operation of you Manitowoc Ice Machine.Read and understand this manual. It containsvaluable care and maintenance information. If youencounter problems not covered by this manual, donot proceed, contact Manitowoc Ice, Inc. We will behappy to provide assistance.ImportantRoutine adjustments and maintenance proceduresoutlined in this manual are not covered by thewarranty.Revised 8/2003