Lenovo ThinkSystem ST250 V2 Quick Start Manual

Also see for 7D8F: Setup guide Maintenance manual Reference

ThinkSystem ST250 V2Type 7D8F and 7D8GQuick StartIn the box• ST250 V2• Material box, including printed documentationIf any item is missing or damaged, contact your place ofpurchase. Ensure that you retain your proof of purchaseand packing material. They might be required to receivewarranty service.Depending on the configuration, the illustrations in thisdocument might differ slightly from your server.First glanceServer front view1 Front panel2 Optical-drive bay 23 Optical-drive bay 14 5 Storage drive baysServer front panel1 Power button with powerstatus LED (green)5 System error LED(yellow)2 Drive activity LED (green) 6 XClarity ControllerUSB 2.0 connector3 Network activity LED(green)7 USB 3.2 Gen 1connector4 System ID button withsystem ID LED (blue)Server rear view1 Power cord connector2 VGA connector3 Serial connector4 Dedicated XClarityController (XCC) networkconnector5 Ethernet 1 connector(shared with XCCnetwork port)6 Ethernet 2 connector7 USB 3.2 Gen 2connectors8 USB 3.2 Gen 2connectors9 PCIe slotsSetting up the system1. Install the required components.2. Install the server into the rack if necessary.3. Connect the cables.4. Power on the server.5. Configure the systemFor detailed information about installing hardware optionsand configuring the system, see the following website:https://thinksystem.lenovofiles.com/help/topic/st250-v2/introduction.htmlFor the Rail Installation Guide that is provided onThinkSystem Documentation Center, see the followingwebsite: https://thinksystem.lenovofiles.com/help/topic/rail_options/rail_options_tower_servers.html11

/ 2

Related manuals for Lenovo 7D8F