ThinkSystem SR630Quick StartIn the box Server Rail kit* Cable management arm* Material box, including items such as accessory kit, power cords* anddocumentationNote: Items marked with asterisk (*) are available on some models only.If any item is missing or damaged, contact your place of purchase. Ensurethat you retain your proof of purchase. They might be required to receivewarranty service.First glanceFront view:Note: Your server might look different from the following illustrations.Figure 1. Server models with four 3.5-inch drive baysFigure 2. Server models with eight 2.5-inch drive baysFigure 3. Server models with ten 2.5-inch drive baysVGA connector (availableon some models)Pull-out information tabXClarity Controller USBconnectorUSB 3.0 connectorPower button with powerstatus LEDNetwork activity LEDSystem ID button with IDLEDSystem error LEDRack latch (right) Hot-swap drive baysDrive status LED (yellow) Drive activity LED (green)Rack latch (left)Rear view:Figure 4. Server models with three PCIe slotsFigure 5. Server models with two PCIe slotsFigure 6. Server models with two hot-swap drive bays and one PCIe slotPCIe slot 1 on riser 1assembly PCIe slot 2 on riser 1assemblyPCIe slot 3 on riser 2assemblyRear 2.5-inch drive baysPower supply 1 Power supply 2 (available onsome models)NMI button USB 3.0 connectorsVGA connector XClarity Controller networkconnectorEthernet connectors on theLOM adapter (available on somemodels)Note: For server models with two hot-swap drive bays in the rear, if theserver is installed in a rack and shipped to you, the server comes with ashipping bracket installed. Before turning on the server, be sure to removethe shipping bracket. For server models with two hot-swap drive bays inthe rear, if the server is installed in a rack for shipping, be sure to installthe shipping bracket. For details, refer to the ThinkSystem SR630Maintenance Manual, which is available at:http://thinksystem.lenovofiles.com/help/topic/7X01/pdf_files.html