ThinkSystem SR630Quick StartIn the box Server Rail kit* Cable management arm* Material box, including items such as accessory kit, power cords*and documentationNote: Items marked with asterisk (*) are available on some modelsonly.If any item is missing or damaged, contact your place of purchase.Ensure that you retain your proof of purchase. They might be requiredto receive warranty service.First glanceFront view:Note: Your server might look different from the following illustrations.Figure 1. Server models with four 3.5-inch drive baysFigure 2. Server models with eight 2.5-inch drive baysFigure 3. Server models with ten 2.5-inch drive baysVGA connector (availableon some models)Pull-out information tabXClarity Controller USBconnectorUSB 3.0 connectorPower button with powerstatus LEDNetwork activity LEDSystem ID button with IDLEDSystem error LEDRack latch (right) Hot-swap drive baysDrive status LED (yellow) Drive activity LED (green)Rack latch (left)Rear view:Figure 4. Server models with three PCIe slotsFigure 5. Server models with two PCIe slotsFigure 6. Server models with two hot-swap drive bays and one PCIeslotPCIe slot 1 on riser 1assembly PCIe slot 2 on riser 1assemblyPCIe slot 3 on riser 2assemblyRear 2.5-inch drive baysPower supply 1 Power supply 2 (available onsome models)NMI button USB 3.0 connectorsVGA connector XClarity Controller networkconnectorEthernet connectors on theLOM adapter (available on somemodels)Note: For server models with two hot-swap drive bays in the rear, if theserver is installed in a rack and shipped to you, the server comes witha shipping bracket installed. Before turning on the server, be sure toremove the shipping bracket. For server models with two hot-swapdrive bays in the rear, if the server is installed in a rack for shipping, besure to install the shipping bracket. For details, refer to theThinkSystem SR630 Maintenance Manual, which is available at:http://thinksystem.lenovofiles.com/help/topic/7X01/pdf_files.html