Lenovo ThinkSystem D2 Manual

Also see for 7X20: Quick start

User Action:Information only; no action is required.• 146F0232: USER_RST_DEFAULT: Button Or Switch, Reset Button pressed was asserted.User reset the system configuration to default settingSeverity: InformationalUser Action:Information only; no action is required.• 1509002D: PIOR_R_3V3_PG: Module Or Board, Device Disabled was asserted.A event indicate right PIOR 3.3V power good faultSeverity: CriticalUser Action:Service support• 1509002E: PIOR_L_3V3_PG: Module Or Board, Device Disabled was asserted.A event indicate left PIOR 3.3V power good faultSeverity: CriticalUser Action:Service support• 15090035: SD_CARD_FAULT: Module Or Board, Device Disabled was asserted.A event indicate SMM No SD card existence or faultSeverity: CriticalUser Action:Insert the SMM SD card onto the SMM assembly.• 15090036: PIOR_R_FAULT: Module Or Board, Device Disabled was asserted.A event indicate SMM No Right PIOR card existence or faultSeverity: CriticalUser Action:Insert the card into PCIe 1-B slot• 15090037: PIOR_L_FAULT: Module Or Board, Device Disabled was asserted.A event indicate SMM No Left PIOR card existence or faultSeverity: CriticalUser Action:Insert the card into PCIe 3-B slot• 180702C0: THERMAL_OVERHEAT: Chassis, transition to Critical from less severe was asserted.System has over-heated condition. Fans are ramped up to help cooling.Severity: CriticalUser Action:1. Ensure the room temperature remains at the required level.2. Ensure all fan modules are installed and operating properly.Chapter 2. SMM2 events 23