.39Y8935 Front End 220-240VAC / 63A Cord (IEC 309 P+N+G)IEC 309 P+N+G (2.5m) - 63A 220- 240VAC Single PhaseOnly a receptacle or a connector is needed to mate with the plug on the PDU inputline cord. See the Additional Plug Information on page 191 in this document forfurther details on IEC309.Note: Note that this is not the same cord as the 40K9613 cord. PDU line cordconnector pin out is different.Matching receptacle listing 332R6W IP-67 HUBBELL, Hubbell receptacle P/NHBL332R6WMatching connector listing 332C6W IP-67 HUBBELL, Hubbell connector P/NHBL332C6WUsed with:39Y8935 – Front End PDU161Figure 99: IEC 309 P+N+G plug (63A) single phase