8200 Series Converged Network Adapter and 3200 Series Intelligent Ethernet Adapter Page 57QConvergeConsole (QCC) CLIQConvergeConsole Command Line Interface (CLI) is a management utility that centralizes managementand configuration of QLogic adapters within the entire network (LAN and SAN).You can use the QCC CLI tool in either interactive or non-interactive mode to configure and manage 8200and 3200 Series Adapters installed on either Linux or Windows host servers.This section outlines the steps for setting up NIC partitions using QCC CLI in interactive mode. Thedisplayed commands apply to both Linux and Windows operating systems.For procedures on installing and starting this management tool, refer to the QConvergeConsole CLI User'sGuide.To set up NIC partitions using QCC CLI:1. Start the QCC CLI interface and select option 6: NIC Partitioning Information(Figure 34).Figure 34: Selecting Option 6 to View NPAR Information Options
