4: Quick SetupSLC™ 8000 Advanced Console Manager User Guide 52The following table lists the SLC navigation actions, buttons, and options.Table 4-3 LCD Arrow Keypad ActionsThe following two tables list the SLC settings and parameters displayed on the LCD.Table 4-4 Front Panel Setup Options with Associated ParametersButton ActionRight arrow To move to the next option (e.g., from Network Settings to Console Settings)Left arrow To return to the previous optionEnter (center button) To enter edit modeUp and down arrows Within edit mode, to increase or decrease a numerical entryRight or left arrows Within edit mode, to move the cursor right or leftEnter To exit edit modeUp and down arrows To scroll up or down the list of parameters within an option (e.g., from IPAddress to Mask)Left/Right ArrowTable 4-5 Front Panel Setup Options, continuedCurrent Time Eth1NetworkSettingsConsolePortSettingsDate / TimeSettingsRelease SerialNumberIDUser ID &Current TimeEth1 IPAddressBaud Rate,Data Bits,Stop Bits,Parity, FlowControlTime Zone Firmwareversion anddate code(display only)Serial Number(display only)Device ID(display only)Eth1 SubnetMaskData Bits Date/Time RestoreFactoryDefaultsGateway Stop BitsDNS1 ParityDNS2 Flow ControlDNS3InternalTemperatureUser Strings Location Device PortsReading inCelsius &FahrenheitDisplaysconfigured userstring(s), if any.Indicates the Rack(RK), Row (RW),& Cluster (CW)locations.Detects theconnection stateof each port:0=No DSR inputsignal detected ondevice port1=DSR inputsignal detected ondevice portUp/DownArrow
