8: USB/SD Card PortSLC™ 8000 Advanced Console Manager User Guide 148Figure 8-3 Devices > USB > Configure3. Enter the following fields.4. Click Apply.5. Click the Manage Files on Storage Device link to view and manage files on the selected USBthumb drive or SD Card. Files on the storage device may then be deleted, downloaded orrenamed. See Manage Files on page 153 for more information.To configure the USB Modem port, from the USB Ports table:1. Click the radio button (on the far right) for Port U1 or U2.2. Click Configure. Figure 8-4 shows the page that displays if a USB modem is inserted in PortU1, or if Port U2 is selected.Mount Select the checkbox to mount the first partition of the storage device onthe SLC unit (if not currently mounted). Once mounted, a USB thumbdrive or SD card is used for firmware updates, device port logging andsaving/restoring configurations.Unmount To eject the USB thumb drive or SD card from the SLC unit , firstunmount the thumb drive or SD card . Select the checkbox to unmount it.Warning: If you eject a thumb drive or SD card from the SLC unitwithout unmounting it, subsequent mounts of a USB thumb drive orSD card in may fail, and you will need to reboot the device to restorethumb drive or SD card functionality.Format Select to: Unmount the USB/SD card device (if it is mounted) Remove all existing partitions Create one partition Format it with the selected file system (ext2, FAT16 or FAT32) Mount the USB deviceFilesystem Select Ext2, FAT16 or FAT32, the filesystems the SLC supports.Filesystem Check Select to run a filesystem integrity check on the thumb drive. This isrecommended if the filesystem does not mount or if the filesystem has errors.
