Frequency and Time Domain Analysis 6Keysight U8903A User’s Guide 135Axis settingsYou can manually change the X-axis and Y-axis settings, such as the minimumand maximum values, as well as select between linear or log scale. You mayperform an autoscale to automatically scale the display according to the signal, orto autoscale the X-axis or Y-axis.Figure 6-4 Axis settings pageInput settingsThe input settings section allows you to select the channel to be configured,measurement bandwidth, input connection, input range, and coupling. You mayset the trigger source and trigger edge on the trigger settings section. The triggersource selection consists of Free Run, External, Channel 1, and Channel 2.Refer to Chapter 3, “Input Settings” on page 76 and “Common Settings” onpage 83 for more information on the input settings.
