Keysight Technologies 6811C Programming Manual

Also see for 6811C: Quick start guide

Contents

Keysight Technologies 6811C Programming Manual Manual pdf 185 page image

Language Dictionary 3Keysight Models 6811C, 6812C, and 6813C Programming Guide 185SYSTem:COMMunicate:LAN:SMASkAssigns a subnet mask for the ac source to use in determining whether a client IPaddress is on the same local subnet. When a client IP address is on a differentsubnet, all packets must be sent to the Default Gateway. Contact your LANadministrator for details.If DHCP is enabled (SYSTem:COMMunicate:LAN:DHCP ON), the specified subnetmask is not used. However, if the DHCP server fails to assign a valid IP address,the instrument uses the Auto-IP subnet mask. A value of “0.0.0.0” or“255.255.255.255” indicates that subnetting is not being used.– CURRent: Returns address currently being used by the instrument.– STATic: Returns static address from non-volatile memory. This address is usedif DHCP is disabled or unavailable.– SYSTem:SECurity:IMMediate sets this parameter to its default value.This setting is non-volatile; it is not changed by power cycling, *RST, orSYSTem:PRESet.If you change this setting, you must send SYSTem:COMMunicate:LAN:UPDate toactivate the new setting.Command syntax SYSTem:COMMunicate:LAN:SMASk Parameters Examples SYST:COMM:LAN:SMAS “12.168.10.1”Query syntax SYSTem:COMMunicate:LAN:SMASk?Parameters [CURRent | STATic] (Default: CURRent)Examples SYSTem:COMMunicate:LAN:SMAS?Returned parameters