27SCPI Programming FundamentalsSimple SCPI Communication MethodsFigure 2-4 Command Window and ping Command resultsDetermining Instrument IP Address1. If necessary, close the Keysight Signal Analyzer application, by selecting File > Exit from the front panel and softkeymenu, then confirming that you want to close the application.2. When you can see the Windows desktop, move the cursor to the bottom of the screen using a mouse or the keyboard,to reveal the Windows Taskbar. In the Windows Taskbar, click Start, Run.3. In the Window Run Dialog (shown in Figure 2-5), type “cmd” then click OK or press Enter to open a DOS commandwindow.Figure 2-5 Windows Run Dialog4. At the DOS command prompt, enter “ipconfig”, and press Enter.The results should resemble the window shown in Figure 2-6. The IP Address is listed under Ethernet adapter LocalArea Connection.
